EEMC is an E-glass fibre chopped strand mat with a silane coupling agent. A styrene soluble emulsion binder is applied to hold the 50mm strands together ensuring quick wet out with UP resins

EEMC mat exhibits fast wet –through and wet-out, good drapability and easy air removal and also provides a good surface for secondary bonding.
Approved by Det Norske Veritas, this mat is suitable for all general moulding work.

300gm, 450gm, 600gm and 900gm weight available.
Standard width is 960mm, but 1040mm is also available.

EMC is an E-glass fibre chopped strand mat with a silane coupling agent. A styrene soluble powder binder is applied to hold the 50mm strands together.

EMC mat exhibits good mat integrity coupled with very fast wet-out and air removal making it ideal for continuous laminating processes, laminates used for chemical storage applications and barrier coats in boat construction.
Approved by Det Norsk Veritas and compatible with UP, vinylester and epoxy resins.

300gm, 450gm and 600gm weight available.
Standard width is 960mm, but 1040mm is also available.

ER10B Spray up roving is made from continuous glass filaments treated with a silane coupling agent being gathered and formed into single fibres. Many fibres are then assembled into a roving of the correct weight/metre length.
ER10B exhibits good choppability with little fuzz, fast air removal and wet-out, and excellent spray up on vertical surfaces.
ER10B is suitalble for all spray up applications whether using manual or automated spray up processes and is particularly suited for spraying large pieces in one shot.
ER10B is compatible with UP and vinylester resins

2400 and 4800 tex available